How To Change The Water Filter In Kenmore French Door Refrigerator

To change the water filter in your Kenmore French door refrigerator, you need to follow these steps: locate the filter compartment, remove the old filter, install the new filter, and reset the filter indicator. You will need a new filter that is compatible with your refrigerator model.

In this post, we will explain how to change the water filter in your Kenmore French door refrigerator in detail, with pictures and videos to guide you. We will also provide some tips and precautions to ensure a successful and safe filter replacement. Read on to learn more.

Step 1: Locate the Filter Compartment

The first step to change the water filter in your Kenmore French door refrigerator is to locate the filter compartment. The filter compartment is inside the refrigerator, in the bottom part of the door. It is usually covered by a plastic cap that can be removed by hand or with a screwdriver.

Before locating the filter compartment, you need to unplug the refrigerator and empty the door bins to prevent any damage or injury. You also need to have a new filter ready that fits your refrigerator model. You can find the model number of your refrigerator on the inside wall of your refrigerator or in the user manual if you have it.

To locate the filter compartment, follow these steps:

• Open the left door of your refrigerator and look for a plastic cap at the bottom of the door. It may have a label that says “Water Filter” or “Filter”.
• Remove the plastic cap by pulling it toward you or unscrewing it with a screwdriver.
• You should see a cylindrical filter inside the compartment with a handle sticking out.

Step 2: Remove the Old Filter

The second step to change the water filter in your Kenmore French door refrigerator is to remove the old filter. The old filter may be dirty or clogged with contaminants, so you need to replace it with a new one.

To remove the old filter, follow these steps:

• Grab the handle of the old filter and twist it counterclockwise by a quarter turn. You should hear a click when it is released.
• Pull the old filter out of the compartment and discard it properly.
• Wipe any water or debris from inside the compartment with a cloth or paper towel.

Step 3: Install the New Filter

The third step to change the water filter in your Kenmore French door refrigerator is to install the new filter. The new filter will provide clean and fresh water and ice for your refrigerator.

To install the new filter, follow these steps:

• Remove the seal or cap from the new filter and check for any damage or defects.
• Align the new filter with the compartment and push it in until it snaps into place. You should hear a click when it is locked.
• Twist the handle of the new filter clockwise by a quarter turn to secure it.
• Replace the plastic cap on the compartment by pushing it or screwing it back.

Here is a video that shows how to install the new filter:

Step 4: Reset the Filter Indicator

The fourth and final step to change the water filter in your Kenmore French door refrigerator is to reset the filter indicator. The filter indicator is a light or a display on your refrigerator that tells you when to change the water filter. It may be located on the dispenser panel or on the control panel inside the refrigerator.

To reset the filter indicator, follow these steps:

• Plug the refrigerator back into the power outlet and turn it on.
• Press and hold the “Filter Reset” button on your refrigerator for three seconds. The button may have a different name depending on your model, such as “Filter Status” or “Water Filter”.
• The filter indicator should change from red to green or from “Replace” to “Good”. This means that the filter has been reset and is ready to use.

Here is a video that shows how to reset the filter indicator:

Tips and Precautions

When changing the water filter in your Kenmore French door refrigerator, you should follow some tips and precautions to ensure a successful and safe filter replacement, such as:

• Change the water filter every six months or sooner if you notice a decrease in water flow, a change in taste or odor, or an increase in ice cubes size.
• Use only genuine Kenmore filters or compatible filters that are certified by NSF International or other reputable organizations. Do not use generic or counterfeit filters that may not fit properly or may not remove contaminants effectively.
• Flush the new filter with clean water before using it. Run about four gallons of water through the dispenser or fill up a pitcher several times until the water runs clear. This will remove any air or carbon dust from the filter.
• Do not use hot water to flush or clean the filter. Use only cold water to avoid damaging the filter or causing leaks.
• Do not force or over-tighten the filter when installing or removing it. This may damage the filter or the compartment. If the filter is stuck or hard to turn, try wiggling it gently or applying some lubricant on the o-rings.

• Do not reuse or refill the old filter. Dispose of it properly according to local regulations or recycling programs.

Conclusion

Changing the water filter in your Kenmore French door refrigerator is a simple and quick process that you can do by yourself, without calling a technician or buying any tools. You just need to locate the filter compartment, remove the old filter, install the new filter, and reset the filter indicator. You also need to follow some tips and precautions to ensure a successful and safe filter replacement.

By changing the water filter regularly, you can enjoy clean and fresh water and ice from your refrigerator and prevent any problems or damage to your appliance. We hope this post has helped you understand how to change the water filter in your Kenmore French door refrigerator and how to do it properly. Happy filtering!