If you have a Frigidaire refrigerator, you may be wondering what the evaporator freezer coil is and why you may need to replace it. The evaporator freezer coil is the part of your refrigerator that cools the air and removes the moisture. It is located behind a panel in the freezer compartment and looks like a radiator.
The evaporator freezer coil can sometimes get damaged or clogged with frost, which can affect the cooling performance and efficiency of your refrigerator. If you notice that your freezer is not cold enough, your food is spoiling faster, or your refrigerator is running constantly, you may have a problem with the evaporator freezer coil.
To replace the evaporator freezer coil on a Frigidaire refrigerator, you will need to unplug the refrigerator, remove the panel, disconnect the wires and tubes, remove the old coil, install the new coil, reconnect the wires and tubes, and replace the panel. This is not a very difficult task, but it does require some tools and skills. In this post, we will show you how to do it step by step.
What You Will Need To Replace The Evaporator Freezer Coil
Before you start, make sure you have the following tools and materials:
- A new evaporator freezer coil that matches your Frigidaire refrigerator model. You can order one from Frigidaire or other online retailers.
- A screwdriver
- A nut driver
- A pair of needle-nose pliers
- A pair of wire cutters
- A pair of wire strippers
- Some wire nuts
- Some electrical tape
- A towel or a bucket to catch any water
How To Replace The Evaporator Freezer Coil On A Frigidaire Refrigerator
To replace the evaporator freezer coil on a Frigidaire refrigerator, follow these steps:
- Unplug your refrigerator from the power outlet and move it away from the wall if necessary.
- Open the freezer door and locate the panel that covers the evaporator freezer coil. It may be secured with screws or clips.
- Use a screwdriver or a nut driver to remove the screws or clips that hold the panel in place. Set them aside.
- Carefully pull the panel away from the freezer and set it aside.
- You should see the evaporator freezer coil behind the panel. It may be covered with frost or ice. If so, use a towel or a bucket to catch any water that drips from it as it melts.
- Disconnect the wires and tubes that connect the evaporator freezer coil to the rest of the refrigerator. Use needle-nose pliers to remove any wire nuts or clips that secure them. Use wire cutters to cut any wires that are soldered or crimped together. Make sure you label or remember which wires and tubes go where.
- Use a nut driver to remove the bolts or screws that hold the evaporator freezer coil in place. Set them aside.
- Carefully lift the evaporator freezer coil out of the freezer and discard it.
- Take the new evaporator freezer coil and place it in the same position as the old one. Make sure it is aligned and secured properly.
- Reconnect the wires and tubes that connect the evaporator freezer coil to the rest of the refrigerator. Use wire strippers to strip any wires that need to be reconnected. Use wire nuts or clips to secure them. Use electrical tape to wrap any exposed wires. Solder or crimp any wires that need to be joined together.
- Replace the panel that covers the evaporator freezer coil and secure it with screws or clips.
- Plug your refrigerator back into the power outlet and move it back to its original position if necessary.
- Turn on your refrigerator and check if it is working properly.
FAQs About Replacing The Evaporator Freezer Coil On A Frigidaire Refrigerator
Q: How do I know if I need to replace the evaporator freezer coil?
A: Some signs that indicate a problem with the evaporator freezer coil are:
- Your freezer is not cold enough or has uneven temperatures
- Your food is spoiling faster than usual
- Your refrigerator is running constantly or making loud noises
- You see frost or ice buildup on the back wall of your freezer
- You see water leaking from your freezer
Q: How often should I replace the evaporator freezer coil?
A: There is no set rule for how often you should replace the evaporator freezer coil, as it depends on how well you maintain your refrigerator and how often you use it. However, some factors that can shorten its lifespan are:
- Frequent opening and closing of the freezer door
- Overloading or underloading your freezer
- Poor ventilation or airflow around your refrigerator
- Power surges or outages
- High humidity or temperature in your environment
Q: How much does it cost to replace the evaporator freezer coil?
A: The cost of replacing the evaporator freezer coil depends on the model and brand of your refrigerator, the availability and price of the part, and the labor charges of the technician if you hire one. On average, you can expect to pay between $200 and $400 for the part and between $100 and $200 for the labor.
Conclusion
Replacing the evaporator freezer coil on a Frigidaire refrigerator is not a very complicated task, but it does require some tools and skills. By following our detailed guide, you can easily do it yourself and save some money and time. However, if you are not confident or comfortable with doing it, you can always contact Frigidaire customer service or a qualified technician for help.
