If you have a GE freezer, you may have noticed that it sometimes makes a revving noise that sounds like a car engine. This noise can be annoying and worrisome, especially if you don’t know what’s causing it or how to fix it. In this blog post, we’ll explain some of the possible reasons why your GE freezer is making a revving noise and how to troubleshoot them. We’ll also give you some tips on how to prevent this noise from happening in the first place.
The most common causes of a GE freezer revving noise are a damaged or bent fan blade, a faulty evaporator fan motor, a defective water inlet valve, or a worn-out condenser fan motor. To fix them, you may need to replace the fan blade, test the fan motor, check the water valve, or clean the condenser coils.
The fan blade is a part that helps circulate the cold air inside your GE freezer. If it is damaged or bent, it may hit something inside the freezer and cause a revving noise. The fan blade can get damaged or bent by hitting ice buildup, food items, or other objects inside the freezer.
To replace the fan blade, you’ll need to unplug the freezer and open the door. Locate the fan blade behind the back panel of the freezer. You may need to remove some screws or clips to access it. Then, pull off the old fan blade from the shaft of the fan motor and replace it with a new one. Make sure it is aligned properly and not touching anything. Reattach the back panel and plug in the freezer.
The evaporator fan motor is another part that helps circulate the cold air inside your GE freezer. If it is faulty, it may make a revving noise as it tries to run. The evaporator fan motor can fail due to bad bearings, worn-out brushes, or electrical problems.
To test the evaporator fan motor, you’ll need to unplug the freezer and open the door. Locate the evaporator fan motor behind the back panel of the freezer. You may need to remove some screws or clips to access it. Then, disconnect the wires that connect it to the power supply and use a multimeter to check for continuity between its terminals. If there is no continuity or if it shows signs of burning or damage, you’ll need to replace it with a new one.
The water inlet valve is a part that supplies water to the ice maker and water dispenser in your GE freezer. If it is defective, it may make a revving noise as it tries to open and close. The water inlet valve can become defective due to mineral deposits, debris, or wear and tear.
To check the water inlet valve, you’ll need to unplug the freezer and move it away from the wall. Locate the water inlet valve behind the back panel of the freezer. You may need to remove some screws or clips to access it. Then, disconnect the water supply line from the valve and place a bucket under it. Turn on the water supply and see if water flows through the valve. If not, you’ll need to replace it with a new one.
The condenser fan motor is a part that helps cool down your GE freezer by blowing air over the condenser coils. If it is worn out or dirty, it may make a revving noise as it struggles to run. The condenser fan motor can become worn out or dirty due to dust, dirt, or grease buildup.
To clean the condenser fan motor, you’ll need to unplug the freezer and move it away from the wall. Locate the condenser fan motor behind or below the freezer. You may need to remove some panels or screws to access it. Then, use a soft brush or a vacuum hose with a brush attachment to gently remove any dust or dirt from the fan blades and motor housing. Be careful not to damage or bend the blades or wires. After cleaning, reattach any panels or screws and plug in the freezer.
Q: What are some normal noises that my GE freezer can make?
A: Some normal noises that your GE freezer can make are:
Q: How can I prevent my GE freezer from making a revving noise?
A: Some ways to prevent your GE freezer from making a revving noise are:
Q: How can I contact GE Appliances Factory Service for repairs?
A: If you need professional help to fix your GE freezer, you can contact GE Appliances Factory Service by visiting their website or calling their toll-free number. They have factory-trained technicians who can diagnose and repair most GE freezer issues in a single visit.
GE freezers are great appliances that can keep your food frozen and fresh for a long time. However, they may sometimes make a revving noise that can be annoying and worrisome. If you notice that your GE freezer is making a revving noise, you can try some of the troubleshooting tips we’ve shared in this blog post. If you need more help or if the problem is beyond your skills, you can always contact GE Appliances Factory Service for fast and reliable repairs.
