How To Find And Use The Drain Plug On Your Kenmore Stand Alone Freezer

The drain plug on your Kenmore stand alone freezer is usually located on the back or the bottom of the freezer, depending on your model. You can use it to drain the water out of the freezer by attaching a hose or placing a pan under it. You should use the drain plug whenever you defrost your freezer manually or after a power outage.

How To Find The Drain Plug On Your Kenmore Stand Alone Freezer

The drain plug on your Kenmore stand alone freezer is a small hole or valve that allows the water to flow out of the freezer during or after the defrosting process. The location of the drain plug depends on the type and model of your Kenmore stand alone freezer. Here are some common places where you can find the drain plug on your Kenmore stand alone freezer:

• On the back wall inside the freezer: Some Kenmore upright freezers have the drain plug on the back wall inside the freezer compartment. You can access it by removing the back panel from the freezer by unscrewing a few screws or bolts that hold it in place. Once the panel is removed, you should see a small hole near the bottom of the freezer.
• On the door of the freezer: Some Kenmore upright freezers have the drain plug on the door of the freezer compartment. You can access it by opening the door and looking for a small hole or valve near the bottom of the door.
• On the outside of the refrigerator door: Some Kenmore bottom freezer refrigerators have the drain plug on the outside of the refrigerator door. You can access it by opening the refrigerator door and looking for a small hole or valve near the bottom of the door.
• On the bottom of the freezer: Some Kenmore chest freezers have the drain plug on the bottom of the freezer. You can access it by tilting the freezer slightly forward and looking for a small hole or valve near the front or the back of the bottom.

How To Use The Drain Plug On Your Kenmore Stand Alone Freezer

Once you find the drain plug on your Kenmore stand alone freezer, you can use it to drain the water out of the freezer. Here are the steps to follow to use the drain plug on your Kenmore stand alone freezer:

1. Empty and unplug the freezer: Remove all the food and ice from the freezer and store them in coolers or give them away. Unplug the power cord and roll it up neatly. Tape the cord to the side of the freezer with packing tape.
2. Defrost and clean the freezer: If your freezer has frost or ice buildup, defrost it completely by leaving the door open for several hours or overnight. Collect any water or ice that drips from the freezer and wipe it dry with a towel. Clean the inside of the freezer with a mild soap and water solution and rinse it well. Dry the inside of the freezer with a clean cloth and leave the door open until moving day.
3. Remove the drain plug: Depending on the location of the drain plug, you may need to remove it by pulling it straight out, unscrewing it, or turning it counterclockwise.
4. Attach a hose or place a pan under the drain plug: You can either attach a garden hose to the drain plug and run it into a utility sink or outdoors, or place a shallow pan under the drain outlet to catch the water as it drains out.
5. Replace the drain plug: Once all the water has drained out, replace the drain plug by pushing it back in, screwing it, or turning it clockwise.
6. Wait before plugging it in: After you finish draining the water out of your Kenmore stand alone freezer, wait for at least 30 minutes before plugging it in to allow any oil that may have moved out of the compressor to flow back into it. This will ensure that your freezer cools properly and efficiently.

When To Use The Drain Plug On Your Kenmore Stand Alone Freezer

You should use the drain plug on your Kenmore stand alone freezer whenever you need to defrost your freezer manually or after a power outage. Here are some reasons why you might need to use the drain plug on your Kenmore stand alone freezer:

• To defrost your freezer manually: If your freezer does not have an automatic defrost feature, or if you notice that the frost or ice buildup is more than 1/4 inch thick, you should defrost your freezer manually to restore its efficiency and performance. You can use the drain plug to remove the water that melts from the frost or ice during the defrosting process.
• To drain the water after a power outage: If your freezer has been without power for more than 24 hours, you should check if there is any water or ice inside the freezer that needs to be drained out. You can use the drain plug to remove the water that may have accumulated from the thawing of the food or ice during the power outage.

Conclusion

Using the drain plug on your Kenmore stand alone freezer is a simple and effective way to remove the water that accumulates during the defrosting process or after a power outage. It can help you prevent ice buildup, water leakage, and odor problems in your freezer. By following the steps in this blog post, you can find and use the drain plug on your Kenmore stand alone freezer and know when to do it. If you have any questions or concerns about using the drain plug on your Kenmore stand alone freezer, feel free to contact us at PressToCook.com. We are here to help you with all your kitchen appliance and food safety needs.