How To Move A Sub Zero Fridge

A Sub Zero fridge is a high-end appliance that offers superior cooling performance, design, and features. However, it is also a heavy and bulky item that requires special care and attention when moving. Whether you are relocating to a new home, remodeling your kitchen, or servicing your fridge, you need to know how to move a Sub Zero fridge safely and correctly.

The best way to move a Sub Zero fridge is to use an appliance dolly with a spacer kit and rough surface adapters. You should also remove the door panels, shelves, and drawers, retract the leveling legs, and tilt the fridge on its back or left side. After moving, you should wait for 24 hours before plugging in the fridge.

Why Moving a Sub Zero Fridge Is Challenging

Moving a Sub Zero fridge is not like moving any other fridge. There are several factors that make it more challenging, such as:

• The weight and size of the fridge. A Sub Zero fridge can weigh anywhere from 300 to 800 pounds, depending on the model and configuration. It can also be up to 48 inches wide and 84 inches tall, making it difficult to maneuver through narrow spaces and doorways.
• The placement of the components. A Sub Zero fridge has a sealed system and other components that are located on the back or left side of the unit. These components are sensitive and can be damaged if the fridge is tilted or laid on the wrong side.
• The risk of oil shifting. A Sub Zero fridge has compressor oils that circulate through the cooling system. If the fridge is tilted or laid on its side or back, the oils can shift and cause cooling problems when the fridge is turned back on.

How to Prepare Your Sub Zero Fridge for Moving

Before moving your Sub Zero fridge, you need to prepare it properly to avoid any damage or injury. Here are some steps you should take:

• Remove custom door panels, if possible, to avoid possible damage from moving. You may need a screwdriver or a hex wrench to do this. Refer to your product manual for instructions.
• Remove all interior shelving and drawers to prevent interior damage. Store them in a safe place or wrap them in bubble wrap or blankets.
• If moving a used unit, be aware of water collection from the evaporator, in the drain pan, or in the ice maker and other sources. If the unit is tipped, this will spill out. You may need to empty or disconnect these parts before moving.
• Retract the front leveling legs into the base assembly using your ratchet or your flat head screwdriver. This will prevent them from scratching the floor or getting caught on obstacles.
• Use your driver to move the rear wheels forward and prop the machine forward. This will make it easier to slide the dolly underneath the fridge.

How to Move Your Sub Zero Fridge with an Appliance Dolly

The best way to move your Sub Zero fridge is to use an appliance dolly with a spacer kit and rough surface adapters. An appliance dolly is a device that has two wheels and a ledge that can support heavy items. A spacer kit is an accessory that fills the gap between the dolly ledge and the bottom of the fridge. A rough surface adapter is another accessory that creates a smooth track for the dolly wheels on uneven surfaces.

To move your Sub Zero fridge with an appliance dolly, follow these steps:

• Slide the ledge of the dolly underneath the Sub Zero fridge. Make sure it extends from one side to another, side to side.
• Tilt the dolly towards yourself to create leverage and lift the fridge off the ground. Be careful not to tip it too much or too fast as this may damage the components or cause oil shifting.
• Wheel the refrigerator to wherever you want to move it, slowly and carefully. Avoid any bumps or obstacles that may cause instability or damage.
• Slowly set the dolly down and slide the ledge out from underneath the fridge.

How to Tilt Your Sub Zero Fridge on Its Side or Back

Sometimes, you may need to tilt your Sub Zero fridge on its side or back to fit it through narrow spaces or doorways. However, you should only do this if absolutely necessary and for a short period of time. You should also follow these guidelines:

• Sub Zeros can be moved with either the back side or left side facing downwards. If placing a Sub Zero on its side, lower the side that is to your left when facing the front of the unit. This is due to the placement of the sealed system and other components.
• Use blankets, pads, or cushions to protect the fridge from scratches or dents when laying it down or lifting it up.
• Do not lay the fridge flat on its back as this may cause oil shifting or damage to the hinges or handles.
• Do not lay the fridge on its right side as this may damage the sealed system or other components.
• Do not lay the fridge on its front as this may damage the door panels or gaskets.

How to Plug In Your Sub Zero Fridge After Moving

After moving your Sub Zero fridge in any position other than upright, you should wait for 24 hours before plugging it in. This will allow the compressor oils to settle and prevent any cooling problems. You should also check the following:

• Make sure the fridge is level and stable on the floor. You may need to adjust the leveling legs or wheels to achieve this.
• Make sure the fridge is plugged into a grounded and dedicated outlet. Do not use an extension cord or a power strip as this may cause electrical issues.
• Make sure the fridge has enough clearance around it for proper ventilation. Refer to your product manual for the recommended dimensions.
• Make sure the fridge is working properly and cooling evenly. If you notice any unusual noises, leaks, or errors, contact a qualified technician for service.

FAQs

Q: How much does a Sub Zero fridge weigh?

A: A Sub Zero fridge can weigh anywhere from 300 to 800 pounds, depending on the model and configuration. You can find the exact weight of your fridge on the product label or in the product manual.

Q: How do I find a qualified technician to service my Sub Zero fridge?

A: You can contact a Factory Certified Installer or a Local Dealer for assistance with moving, installing, or servicing your Sub Zero fridge. You can also visit the Sub Zero website and use the service locator tool to find a certified service provider near you.

Q: How do I clean my Sub Zero fridge after moving?

A: To clean your Sub Zero fridge after moving, you can wipe it with a mild detergent and warm water. Avoid using abrasive cleaners or solvents as they may damage the surface. You can also use a vacuum cleaner or a brush to clean the condenser coils at least once a year to remove any dust or dirt that may affect the cooling performance.

Conclusion

Moving a Sub Zero fridge is not an easy task, but it can be done safely and correctly with the right tools and techniques. You should use an appliance dolly with a spacer kit and rough surface adapters, remove the door panels, shelves, and drawers, retract the leveling legs, and tilt the fridge on its back or left side. After moving, you should wait for 24 hours before plugging in the fridge and check if it is working properly.