How To Remove Doors From LG Refrigerator

If you need to move your LG refrigerator to a different location or replace a damaged door, you may have to remove the doors from the appliance. Removing the doors from an LG refrigerator is not a difficult task, but it requires some tools and precautions. In this post, we will show you how to remove the doors from an LG refrigerator step by step.

What tools do you need to remove the doors from an LG refrigerator?

To remove the doors from an LG refrigerator, you will need the following tools:

• A small flat-head screwdriver
• A Phillips-head screwdriver
• A 10 mm socket wrench
• A towel or a bucket
• A pair of gloves

How to remove the freezer door from an LG refrigerator

To remove the freezer door from an LG refrigerator, follow these steps:

1. Unplug your refrigerator: Before you start working on your refrigerator, make sure to unplug it from the power outlet to avoid any shocks or injuries.
2. Turn off the water valve: If your refrigerator has a water dispenser or an ice maker, you need to turn off the water valve that supplies water to the refrigerator. Then, dispense any remaining water from the water line to prevent any leaks or spills.
3. Remove the lower basket: Open the freezer door and pull out the lower basket. Lift it up and out of the rails and set it aside.
4. Remove the screws from the rails: Locate and remove the two Phillips-head screws that secure the rails to the drawer assembly. Do this on both sides of the freezer door.
5. Remove the drawer assembly: Grab the drawer assembly with both hands and lift it up and out of the rails. Be careful not to pull or tug on any wires or tubes that may be connected to the drawer assembly. Set it aside.
6. Push back the rails: Push back the rails into a closed position. They are spring-loaded, so they should snap back into place. Use some tape to secure them if necessary.
7. Remove the hinge cover: Locate and remove the screw that holds the hinge cover on top of the freezer door. Use a Phillips-head screwdriver to do this. Then, lift off the hinge cover and set it aside.
8. Disconnect the wire harness: Locate and disconnect the wire harness that connects the freezer door to the refrigerator. Press on the tab and pull apart gently.
9. Disconnect the water tube: Locate and disconnect the water tube that connects the freezer door to the refrigerator. Press on the collar and pull apart gently. Use a towel or a bucket to catch any water that may drip from the tube.
10. Remove the top hinge: Locate and remove the three bolts that secure the top hinge to the freezer door. Use a 10 mm socket wrench to do this. Then, lift off the top hinge and set it aside.
11. Remove the freezer door: Lift up the freezer door slightly and pull it out of the bottom hinge pin. Be careful not to drop or damage the door. Set it aside.

How to remove the fridge doors from an LG refrigerator

To remove the fridge doors from an LG refrigerator, follow these steps:

1. Unplug your refrigerator: If you have not done so already, make sure to unplug your refrigerator from the power outlet before working on it.
2. Remove any shelves or bins: Open both fridge doors and remove any shelves or bins that may interfere with removing them.
3. Remove one of the hinge covers: Locate and remove one of the hinge covers on top of one of the fridge doors. Use a small flat-head screwdriver to pry off the cover and set it aside.
4. Disconnect any wire harnesses: Locate and disconnect any wire harnesses that connect the fridge door to the refrigerator. Press on the tabs and pull apart gently.
5. Remove one of the top hinges: Locate and remove the three bolts that secure one of the top hinges to one of the fridge doors. Use a 10 mm socket wrench to do this. Then, lift off the top hinge and set it aside.
6. Remove one of the fridge doors: Lift up one of the fridge doors slightly and pull it out of the bottom hinge pin. Be careful not to drop or damage the door. Set it aside.
7. Repeat for the other fridge door: Repeat steps 3 to 6 for the other fridge door.

How to reinstall

the doors on an LG refrigerator

To reinstall the doors on an LG refrigerator, follow these steps in reverse order:

1. Reinstall one of the fridge doors: Align one of the fridge doors with the bottom hinge pin and lower it into place.
2. Reinstall one of the top hinges: Align one of the top hinges with the holes on one of the fridge doors and secure it with the three bolts. Use a 10 mm socket wrench to do this.
3. Reconnect any wire harnesses: Reconnect any wire harnesses that connect the fridge door to the refrigerator. Push them together until they click.
4. Reinstall one of the hinge covers: Snap one of the hinge covers back onto one of the top hinges.
5. Repeat for the other fridge door: Repeat steps 1 to 4 for the other fridge door.
6. Reinstall any shelves or bins: Reinstall any shelves or bins that you removed from the fridge doors.
7. Reinstall the freezer door: Align the freezer door with the bottom hinge pin and lower it into place.
8. Reinstall the top hinge: Align the top hinge with the holes on the freezer door and secure it with the three bolts. Use a 10 mm socket wrench to do this.
9. Reconnect the water tube: Reconnect the water tube that connects the freezer door to the refrigerator. Push them together until they click.
10. Reconnect the wire harness: Reconnect the wire harness that connects the freezer door to the refrigerator. Push them together until they click.
11. Reinstall the hinge cover: Snap the hinge cover back onto the top hinge.
12. Reinstall the drawer assembly: Align the drawer assembly with the rails and lower it into place. Be careful not to pinch or damage any wires or tubes that may be connected to the drawer assembly.
13. Reinstall the screws on the rails: Reinstall the two Phillips-head screws that secure the rails to the drawer assembly. Do this on both sides of the freezer door.
14. Reinstall the lower basket: Slide the lower basket back into the rails and push it in until it clicks.
15. Turn on the water valve: If your refrigerator has a water dispenser or an ice maker, turn on the water valve that supplies water to the refrigerator.
16. Plug in your refrigerator: Plug in your refrigerator to the power outlet and check if everything is working properly.

Conclusion

Removing the doors from an LG refrigerator is a simple process that requires some tools and precautions. You need to unplug your refrigerator, turn off the water valve, remove any shelves or bins, remove the hinge covers, disconnect any wire harnesses or water tubes, remove the top hinges, and lift off the doors. To reinstall them, you need to do everything in reverse order.