how-to-remove-the-bottom-of-a-breville-blender

How To Remove The Bottom Of A Breville Blender

Breville blenders are popular kitchen appliances known for their power and durability. However, with regular use, blenders require maintenance and cleaning to keep them functioning properly. A key part that needs cleaning is the blender bottom, which holds the blades and connects to the motor base. Over time, food residue can build up and harden inside the bottom if not cleaned regularly.

Removing the blender bottom on a Breville is easy to do. With just a few simple steps, you can detach, clean, and reattach the bottom without any special tools. Here is a step-by-step guide on how to safely and effectively remove the bottom of your Breville blender.

Preparing To Remove The Bottom

Before removing the blender bottom, make sure to unplug the blender first. This prevents the motor from accidentally turning on when handling the bottom and avoids any electrical hazards.

Clear the area around the blender so you have open workspace. Have a towel ready to lay the blender down on. Also, prepare a bowl of warm soapy water to soak the blender bottom in after removal. Mild dish soap works well for cleaning the blender base.

Inspect the bottom of the blender pitcher for any large debris or food buildup. Remove any chunks to prevent clogging drains later.

Breville Hemisphere Smooth Blender

Removing The Bottom

Most Breville blender pitchers have an integrated blender bottom that connects to the pitcher with a threading mechanism. Here are the steps to unscrew the bottom:

  1. Turn the pitcher upside down to access the bottom. Use both hands to grip the pitcher firmly.
  2. Twist the bottom counterclockwise to loosen it. Apply gentle force if needed to get it rotating.
  3. Once loose, continue twisting the bottom until it detaches completely from the pitcher. Place it facing up on your prepared towel.
  4. Visually inspect the now exposed blades and bottom interior for residue. Use warm water to rinse away any loose debris.
  5. Set aside the pitcher and focus just on cleaning the separated bottom piece.

Cleaning The Blender Bottom

With the bottom removed, cleaning is much easier. Here are tips for cleaning it effectively:

  • Immerse the blender bottom in the warm soapy water you prepared. Let it soak for 10-15 minutes to loosen any dried-on residue.
  • Use a soft brush or sponge to gently scrub the blades and around the edges. Avoid using anything abrasive that could damage the parts.
  • If needed, use a small knife to gently scrape stubborn buildup off the crevices and threads.
  • Rinse thoroughly with clean water until all soap is removed. You can also clean it briefly in the dishwasher.
  • Dry it completely with a towel. Inspect that no residue remains and the gasket seal looks intact.
  • Wipe down the now-exposed blade area inside the pitcher with a soapy sponge too. Rinse and dry.

the Fresh & Furious™ Blender • Breville

Reattaching The Bottom

Once the bottom and pitcher are cleaned, just reverse the steps to reattach:

  1. Orient the bottom piece upright and insert it into the open pitcher end.
  2. Twist clockwise while applying gentle downward pressure to thread it back into place.
  3. Keep rotating until the bottom is tightly sealed against the pitcher again.
  4. Test that the bottom stays securely in place by trying to twist it. It should remain firmly attached and not wiggle loose.

Once reassembled, your Breville blender will be ready to use again! Just remember to rinse the pitcher and wipe the blades after each use to prevent extensive buildup over time. Taking the time to regularly detach and clean the bottom will help keep your blender functioning like new.

Breville Hemisphere Blender: BBL605XL | Crate and Barrel

FAQs About Removing The Blender Bottom

How often should I remove and clean the blender bottom?

For moderate blender use, aim to remove and deep clean the bottom every 2-3 weeks. If making nutrient-rich green smoothies daily, disassemble and clean the bottom weekly.

What should I use to clean the blender bottom?

Avoid abrasive scouring pads. For safe cleaning, use warm soapy water, soft sponges or brushes, and plastic scrapers. You can also place it in the dishwasher.

My blender bottom is stuck – how do I get it loose?

Apply WD-40 or cooking oil around the seal, let it sit briefly, then twist while gently pulling down. Check for any obvious obstructions in the threads. Repeat process if needed until bottom gradually loosens.

Conclusion 

Regular cleaning of a Breville blender pitcher and bottom is essential maintenance to keep these appliances performing their best. Thankfully detaching and reattaching the bottom is a straightforward process once you know the proper steps. Be sure to remove any debris before disassembling, then soak and scrub the separated pieces until spotless. Reassemble once fully dry. Adding this quick cleaning to your routine helps remove hidden gunk from the hard-to-reach bottom area and prevents accumulation of damaging residue on the blades and seal over time. With just a little hands-on effort, your Breville blender can continue emulsifying, crushing, and processing for years to come.

Meet

Dale

Dale is the founder and appliance expert behind PressToCook.com. He is a former restaurant manager who has spent years behind the scenes using just about every kitchen appliance imaginable.

He founded PressToCook.com to debunk the myths around appliances and show home cooks how to truly harness the power of their gadgets to whip up incredible dishes easily and efficiently.

Dale is on a mission to prove that kitchen appliances should be celebrated, not feared, and he can’t wait to share his real-world tips and tricks with you!
© 2024 PressToCook.com. All rights reserved.

Site built by LaowaiSites