How To Reset The Water Filter In A Whirlpool Fridge

If you own a Whirlpool fridge, you may have noticed a water filter status light on the control panel. This light tells you when it’s time to replace the water filter or if you have installed a new one incorrectly. But what if the light stays on after you have changed the filter? How do you reset it?

In this blog post, we will show you how to reset the water filter light on a Whirlpool fridge in a few simple steps. We will also explain why the light is on and when you should replace your water filter. Read on to learn more!

To reset the water filter light on a Whirlpool fridge, you need to locate the reset button on the control panel and press and hold it for three seconds or until you hear a beep. The location and shape of the reset button may vary depending on the model and type of your fridge.

Why is the water filter light on?

The water filter light is a helpful feature that reminds you to change your water filter regularly. Depending on the model, the light may change color from blue to orange or red when it’s time to replace the filter. Some models may also display a message like “Replace Filter” or “Order Filter” on the screen.

The water filter light may also turn on if you have installed a new filter incorrectly or if the filter is clogged. A clogged or faulty filter can reduce the water flow to the ice maker and dispenser, resulting in small ice cubes, low ice production or longer dispensing times.

How to locate the reset button

The first step to reset the water filter light is to find the reset button on your fridge. The location and shape of the button may vary depending on the type and model of your fridge. Here are some common places where you can find the reset button:

• On some French door refrigerators, the reset button is located on a control panel attached to the interior ceiling of the fridge.
• On most side-by-side refrigerators, the reset button is located on the water dispenser control panel on the exterior of the freezer door.
• On some models, the reset button may be labeled as “Filter Reset”, “Water Filter” or “Options”.
• On some models, there may be no physical reset button, but instead a menu option on the digital control interface.

How to reset the water filter light

Once you have located the reset button, follow these steps to reset the water filter light:

• Check the color of the status light. If it’s blue, you don’t need to reset it. If it’s orange or red, you need to reset it.
• Press and hold the reset button for three seconds or until you hear a beep or chirp. The sound indicates that the system has been reset.
• Release the button and check if the status light has turned off or changed color to blue. If not, repeat the process until it does.

When to replace your water filter

It is recommended that you replace your water filter every six months, when the indicator light comes on, or as needed. A fresh water filter can ensure that you get clean and safe drinking water and ice from your fridge.

To replace your water filter, follow these steps:

• Locate the filter in your Whirlpool refrigerator. The filter is usually located in the grille at the bottom of the fridge.
• Remove the old filter by twisting it to the left and pulling it out.
• Rinse the new filter under running water to remove any dirt or debris.
• Insert the new filter into the slot and twist it to the right until it locks in place.
• Reset the water filter status light as described above.

FAQs

Q: How do I know if my water filter is clogged?

A: Some signs that your water filter is clogged are:

• Reduced water flow or pressure from the dispenser
• Smaller or fewer ice cubes from the ice maker
• Longer dispensing or ice making times
• Cloudy or bad-tasting water or ice

Q: What if I don’t have a water filter status light on my fridge?

A: If your fridge doesn’t have a water filter status light, you can use other methods to keep track of when to change your filter, such as:

• Marking your calendar with a reminder every six months
• Setting an alarm or notification on your phone or computer
• Using a sticker or label on your fridge with the date of installation
• Ordering a replacement filter online with automatic delivery

Q: What kind of water filter do I need for my Whirlpool fridge?

A: The type of water filter you need depends on your fridge model and serial number. You can find this information on a label inside your fridge or in your owner’s manual. You can also use an online tool like this one to find the right filter for your fridge. Make sure you use a genuine Whirlpool or EveryDropTM water filter for optimal performance and compatibility.

Conclusion

Resetting the water filter light on a Whirlpool fridge is a simple task that can help you maintain the quality and safety of your drinking water and ice. By following the steps above, you can easily reset the light and enjoy fresh and clean water from your fridge.

We hope this blog post has been helpful and informative. If you have any questions or comments, feel free to leave them below. And don’t forget to check out our other blog posts on kitchen appliances and food safety at PressToCook.com!