If you have a Kenmore freezer with a reversible door, you may want to switch the door to the left side for convenience or preference. Switching the door on your Kenmore freezer is not a difficult task, but it does require some tools and attention to detail. In this post, we will show you how to switch the door on your Kenmore freezer to the left and what tools you need.
To switch the door on your Kenmore freezer to the left, you will need a screwdriver, a wrench, and a socket set. You will also need to remove and reinstall the door handles, hinges, and pins on the opposite sides of the freezer.
How to switch the door on your Kenmore freezer to the left
Before you start switching the door on your Kenmore freezer, make sure you unplug the freezer from the power outlet and empty it of all food items. You may also want to place some towels or a large pan on the floor to catch any water that may drip from the freezer. Then, follow these steps:
- Locate the hinge cover on the top of the freezer and pry it off with a screwdriver. You should see two screws that hold the upper hinge in place.
- Hold the freezer door in place while you remove the two screws with a socket set. Then, lift off the upper hinge and set it aside. Be careful not to lose any washers or spacers that may be attached to the hinge.
- Tilt the freezer door away from the freezer and lift it up and off the middle hinge pin. Check for any plastic washers or guides that fit into the bottom of the freezer door and keep them in a safe place.
- Remove the middle hinge by unscrewing it from the side of the freezer with a socket set. Then, remove the bottom hinge by unscrewing it from the bottom of the freezer with a wrench.
- Remove the door handles from both sides of the freezer door by unscrewing them with a screwdriver. You may need to pry off some plastic caps or covers to access the screws.
- Flip over the freezer door so that it opens from the left side. Then, reinstall the door handles on the opposite sides of the door by screwing them in with a screwdriver.
- Move the bottom hinge to the opposite side of the freezer and secure it with a wrench. Make sure that the hinge pin is pointing up and aligns with the hole in the bottom of the freezer door.
Move the middle hinge to the opposite side of the freezer and secure it with a socket set. Make sure that the hinge pin is pointing down and aligns with the hole in the top of the freezer door.
- Place any plastic washers or guides back into their slots in the bottom of the freezer door. Then, lower the freezer door onto the middle hinge pin and close it gently.
- Place any washers or spacers back onto their slots in the upper hinge. Then, lower it onto the top of the freezer door and secure it with two screws using a socket set.
- Replace the hinge cover on top of the upper hinge and snap it into place.
FAQs
Q: How do I know if my Kenmore freezer has a reversible door?
A: Most Kenmore freezers have reversible doors, but some models may not. To check if your Kenmore freezer has a reversible door, look for pre-drilled holes or plugs on both sides of your freezer door and cabinet. These indicate where you can attach or remove hinges and handles.
Q: What are some benefits of switching my Kenmore freezer door to the left?
A: Switching your Kenmore freezer door to the left can have some benefits, such as:
- Improving your access to your frozen items by opening from your preferred side
- Saving space by avoiding interference with other appliances or cabinets
- Enhancing your kitchen layout by matching your refrigerator or other appliances
Q: What are some tips for switching my Kenmore freezer door to the left?
A: Here are some tips for switching your Kenmore freezer door to the left:
- Work carefully and slowly to avoid damaging your freezer or injuring yourself
- Keep track of all parts and screws and label them if necessary
- Use an assistant or a support device to hold your freezer door while you work
- Check that your freezer is level and balanced after switching your door
- Plug in your freezer and wait for 24 hours before loading it with food
Conclusion
Switching your Kenmore freezer door to left is an easy DIY project that can improve your convenience and comfort in using your appliance. To switch your Kenmore freezer door to left, you will need a screwdriver, a wrench, and a socket set. You will also need to remove and reinstall the door handles, hinges, and pins on the opposite sides of the freezer. We hope this post has helped you learn how to switch your Kenmore freezer door to the left and what tools you need. If you have any questions or comments, please feel free to share them below.
