How To Take Apart A Frigidaire Freezer Department

If you have a Frigidaire refrigerator with a freezer department, you may need to take it apart for various reasons, such as cleaning, defrosting, repairing, or replacing parts. Taking apart a Frigidaire freezer department is not very difficult, but it does require some tools and caution. In this post, we will show you how to take apart a Frigidaire freezer department in a few simple steps.

To take apart a Frigidaire freezer department, you need to unplug the refrigerator, remove the freezer drawer, remove the light bulb cover and bulb, remove the back panel, and disconnect the wiring harness. You need a Phillips® screwdriver, a flat-head screwdriver, a pair of needle-nose pliers, and a towel or a soft cloth.

What You Need To Take Apart A Frigidaire Freezer Department

Before you start, make sure you have the following tools and materials ready:

• A Phillips® screwdriver
• A flat-head screwdriver
• A pair of needle-nose pliers
• A towel or a soft cloth
• A helper to assist you with removing and reinstalling the freezer drawer

You also need to unplug the refrigerator from the power outlet and empty the freezer drawer of any food items.

Step-By-Step Guide To Take Apart A Frigidaire Freezer Department

Follow these steps to take apart a Frigidaire freezer department:

1. Open the freezer drawer and locate the light bulb cover on the left side of the drawer. It is a plastic piece that covers the bulb and has two screws on it.
2. Use a Phillips® screwdriver to loosen and remove the two screws that secure the light bulb cover. Be careful not to drop or lose any screws.
3. Lift off the light bulb cover and set it aside on a towel or a soft cloth.
4. Unscrew the light bulb by turning it counterclockwise and pull it out of the socket. Dispose of it properly or save it for later use.
5. Have your helper support the freezer drawer as you pull it out of its tracks. To do this, lift up the front of the drawer slightly and pull it out until it stops. Then, lift up both sides of the drawer at the same time and pull it out completely.
6. Set the freezer drawer aside on a towel or a soft cloth.
7. Locate the back panel of the freezer department. It is a metal piece that covers the evaporator coils and fan behind it. It has several screws on it.
8. Use a Phillips® screwdriver to loosen and remove all the screws that secure the back panel. Be careful not to drop or lose any screws.
9. Pull off the back panel and set it aside on a towel or a soft cloth.
10. Locate the wiring harness that connects the fan motor to the control board. It is a white plastic connector with several wires coming out of it.
11. Use a pair of needle-nose pliers to squeeze and release the locking tabs on both sides of the connector. Then, pull the connector apart gently.

You have successfully taken apart your Frigidaire freezer department.

FAQs About Taking Apart A Frigidaire Freezer Department

Here are some common questions and answers about taking apart a Frigidaire freezer department:

• Why do I need to take apart my Frigidaire freezer department? You may need to take apart your Frigidaire freezer department for various reasons, such as:
  • Cleaning: If your freezer department is dirty or has ice buildup, you may need to take it apart to clean it thoroughly and prevent odors or bacteria growth.
  • Defrosting: If your freezer department is not frost-free, you may need to take it apart to defrost it manually and remove any excess ice that may affect its performance or efficiency.
  • Repairing: If your freezer department is not working properly or has faulty parts, you may need to take it apart to troubleshoot and fix the problem or replace any damaged parts.
  • Replacing: If your freezer department is old or beyond repair, you may need to take it apart to replace it with a new one.
• How do I reassemble my Frigidaire freezer department? To reassemble your Frigidaire freezer department, you need to reverse the steps for taking it apart. First, reconnect the wiring harness by aligning and pushing together both sides of the connector until they lock into place. Next, replace the back panel and secure it with screws. Then, reinstall the light bulb by screwing it into the socket clockwise until it is snug. Replace the light bulb cover and secure it with screws. Finally, reinstall the freezer drawer by aligning both sides of the drawer with their tracks and pushing them in until they stop. Then, lower down both sides of the drawer at the same time and push them in until they lock into place.
• What are some safety tips for taking apart my Frigidaire freezer department? Some safety tips are:
  • Unplug your refrigerator before working on it
  • Wear gloves and eye protection when handling sharp or cold parts
  • Do not touch the evaporator coils or fan with wet or oily hands
  • Do not force or twist any parts that are stuck or difficult to remove
  • Keep children and pets away from your work area

We hope this post has helped you learn how to take apart a Frigidaire freezer department. If you have any questions or comments, feel free to leave them below. And if you enjoyed this post, don’t forget to share it with your friends and family who might find it useful too!