The water filter on your Kenmore freezer is usually located on the front panel near the floor, on the door of the freezer compartment, or on the back wall inside the freezer compartment. You can change the water filter by locating it, removing the old filter, inserting the new filter, and resetting the filter indicator. You should change the water filter every 6 months or when the filter indicator turns red.
How To Find Out If Your Kenmore Freezer Has A Water Filter
The first step to find out if your Kenmore freezer has a water filter is to locate it. The location of the water filter depends on the type and model of your Kenmore freezer. Here are some common places where you can find the water filter on your Kenmore freezer:
- On the front panel near the floor: Some Kenmore freezers have the water filter on the front panel near the floor. You can access it by opening a small door or cover that reveals the filter cartridge. The filter cartridge may have a push button or a twist lock mechanism to release it.
- On the door of the freezer compartment: Some Kenmore freezers have the water filter on the door of the freezer compartment. You can access it by opening the freezer door and looking for a small hole or valve near the bottom of the door. The hole or valve may have a push button or a twist lock mechanism to release the filter cartridge.
- On the back wall inside the freezer compartment: Some Kenmore freezers have the water filter on the back wall inside the freezer compartment. You can access it by removing the back panel of the freezer by unscrewing or unbolting it from the wall. Once the panel is removed, you should see a small hole or valve near the bottom of the wall. The hole or valve may have a push button or a twist lock mechanism to release the filter cartridge.
How To Change The Water Filter On Your Kenmore Freezer
Once you find the water filter on your Kenmore freezer, you can change it by following these steps:
- Get a new filter that fits in your freezer model: Find the model number of your freezer on the inside wall of your freezer or in the user manual if you have it. When you get a new filter, make sure it’s compatible with the freezer you have or else it may not work or fit. You can either buy the same brand filter as your freezer or a third-party filter that fits in your model. 1 You can buy filters for your freezer either online or at an appliance store. Freezer filters usually cost between $25-30 USD.
- Unplug the freezer from the wall outlet: Before you start changing or replacing any part of your freezer, you should always unplug it from the power source to avoid electric shock or injury.
- Remove the old filter: Depending on the location and type of the water filter, you may need to press a release button or twist it in the opposite direction as the clock to remove it from its slot. Pull it straight out and discard it properly.
- Insert the new filter: Take off the seal of the new filter and push it into its slot, and rotate it clockwise or press it until it locks into place. You may hear a click sound when it is secured.
- Reset the filter indicator: Some Kenmore freezers have a filter indicator that shows the status of the water filter. It may be a light or a display that changes color from green to yellow to red as the filter gets older. To reset the filter indicator, you may need to press and hold a “Filter Reset” button near the water dispenser for three seconds. The indicator should turn green again when it is reset.
- Flush the new filter with clean water: After you change the water filter on your Kenmore freezer, you should flush it with clean water to remove any air or debris that may be trapped in it. To flush the new filter, you may need to run the water dispenser for about 3 minutes or until the water runs clear and steady. You may also need to discard the first batch of ice that is made after the filter change.
When To Change The Water Filter On Your Kenmore Freezer
You should change the water filter on your Kenmore freezer every 6 months or when the filter indicator turns red. This will ensure that your water and ice are fresh and safe to consume. If you notice that your water or ice has a bad taste, odor, or color, or if the water pressure or flow is low, you may need to change the water filter sooner than 6 months. Changing the water filter on your Kenmore freezer regularly can also prevent your water system from getting clogged up or damaged by contaminants.
Conclusion
Changing the water filter on your Kenmore freezer is a simple and important task that can improve the quality and safety of your water and ice. By following the steps in this blog post, you can find out if your Kenmore freezer has a water filter and how to change it. If you have any questions or concerns about changing the water filter on your Kenmore freezer, feel free to contact us at PressToCook.com. We are here to help you with all your kitchen appliance and food safety needs.
