Moving to a new home can be an exciting but stressful time. Packing up your belongings properly is key to ensuring nothing gets damaged during the move. One appliance that requires special care when packing is the KitchenAid stand mixer. This versatile and often expensive kitchen tool is used for everything from whipping cream to kneading bread dough. Follow these tips to safely pack your KitchenAid mixer so it arrives in working order.

Dismantle the Mixer

First, you’ll need to take apart the mixer so you can wrap the pieces individually. Make sure to unplug the mixer before disassembling.

• Remove any attachments like the mixing bowl, dough hook, whisk, or paddle. Set them aside to pack separately.
• Release the mixing head by pressing the latch at the top back of the mixer. Lift the head up and off the assembly.
• The flat beater, dough hook, and whisk can be removed from the mixing head. Take them out and set aside.
• If your model has a pouring shield, remove that as well.

Now your KitchenAid mixer should be broken down into its main components: stand base, flat beater, dough hook, whisk, mixing head, pouring shield, mixing bowl, and attachments.

Clean the Mixer

Before packing up the pieces, give your mixer a thorough cleaning.

• Wipe down the stand base and plug with a soft cloth. Remove any dried batter, flour, or grime.
• Wash the mixing attachments and bowl in warm soapy water. Rinse and dry completely.
• Clean the mixing head and pouring shield with a damp cloth. Make sure no residue remains.

This prevents bugs or odors from developing while in storage.

Protect the Electrical Components

The motor and electrical components are the most delicate parts of the mixer. They require special protection during shipping to prevent jostling and impacts.

• Wrap the stand base in a few layers of bubble wrap. Make sure the plug is completely covered.
• Use crumpled newspaper or packing paper to fill empty spaces inside the base for added cushioning.
• Place the wrapped base inside a sturdy box just slightly larger than the mixer. Fill any extra room with newspaper.

Wrap the Mixing Head and Attachments

The mixing head and attachments should also be wrapped carefully.

• Place the flat beater, dough hook, whisk, and pouring shield together and wrap as a bundle in bubble wrap.
• Wrap the mixing head by itself in a layer of bubble wrap.
• For the bowl, insert some packing paper inside for cushioning. Wrap the outside in bubble wrap or foam sheets.
• Individually wrap any additional attachments in bubble wrap as well.

Pack in Moving Boxes

You can now place the wrapped mixer components safely in boxes.

• Pack the mixing head and attachments bundle together in a sturdy box with added padding.
• Pack the stand base box inside a larger box with at least 2 inches of padding on all sides. Mark this box “Fragile” with arrows pointing up.
• Place the mixing bowl inside a dish-pack box or wrap in a thick blanket before putting in a box.

Use crumpled newspaper between the wrapped items to prevent shifting. Fill any empty spaces with packing paper to limit movement. Seal boxes securely with packing tape.

Transport Vertically

Be sure to keep the boxes upright throughout loading, transport, and unloading. Laying the mixer flat can damage the gears or shaft. Mark boxes clearly with “This Side Up” arrows.

Unpack and Reassemble at New Home

When unpacking, carefully inspect the mixer parts for any damage before reassembling. Wipe down any dusty surfaces. Refer to the instruction manual for how to reattach the mixing head, bowl lift, and attachments.

With proper disassembly, cleaning, wrapping, and boxing, your KitchenAid mixer should arrive safely at your new home, ready to mix up delicious baked goods once again! Being diligent about padding and immobilizing the parts will keep this appliance protected during the moving process.

Frequently Asked Questions

How should I pack the KitchenAid mixing bowls and attachments?

Wrap the stainless steel mixing bowls and attachments individually in bubble wrap or foam sheets. For extra protection, place some crumpled packing paper inside the bowls before wrapping. Pack attachments together in a sturdy box filled with padding.

What’s the best way to transport my KitchenAid mixer in a moving truck?

Pack the mixer base and components in sturdy boxes with 2+ inches of padding on all sides. Load the boxes vertically in the truck, do not place them flat. Secure boxes so they don’t shift during transit. Mark boxes clearly with “Fragile” and “This Side Up” arrows.

Is it necessary to clean the mixer before packing?

Yes, always give your KitchenAid mixer a thorough cleaning before packing it up for moving. Wipe down the base, head, and attachments to remove any food residue. This prevents odors, stains, or bugs during storage and transport.

Conclusion

Moving requires careful packing practices to keep your belongings secure. Taking the time to properly disassemble, wrap, and box your KitchenAid stand mixer will ensure this appliance arrives safely at your new home. Strategically immobilizing the parts and using ample padding prevents jostling that can lead to costly damages. Follow these tips for a smooth moving process. With some care and preparation, your KitchenAid mixer will be ready to resume its baking duties in no time.