You love your Panasonic inverter microwave, don’t you? It’s a posho wosho appliance that can cook, reheat, and defrost your food with precision and efficiency. It’s a smart device that can adjust the power level and cooking time according to the food type and size. It’s a reliable partner that always delivers the best results.
Until it doesn’t.
One day, you try to use your Panasonic inverter microwave, but nothing happens. The buttons are not working at all. You can’t start, stop, or change the settings of your microwave. You can’t even set the clock or the timer.
What do you do?
Don’t panic. There are some simple steps you can take to fix your Panasonic inverter microwave buttons and make them work again. In this guide, we will show you how to troubleshoot and repair your microwave buttons in 4 easy steps. We will also answer some frequently asked questions about Panasonic inverter microwaves and their button problems.
So, if you are ready to get your microwave buttons back to work, keep reading!
The first thing you need to do is to check the power source of your microwave. Make sure it is plugged in properly and securely into a working outlet. Sometimes, the plug can get loose or the outlet can get tripped or damaged.
If the plug and the outlet are fine, check the fuse or the circuit breaker of your microwave. If they are blown or tripped, replace or reset them accordingly.
If the power source is not the problem, move on to the next step.
The next thing you need to check is the control panel of your microwave. The control panel is the part of your microwave that has the buttons and the display. If the control panel is faulty or damaged, it can cause your buttons to stop working.
To check the control panel, you need to use a multimeter or a continuity tester. You need to unplug the microwave and remove the cabinet to access the control panel. Then, you need to test the control panel for continuity by touching its terminals with the probes of your tester.
If the control panel shows continuity, it means it is working properly. If not, it means it is defective and needs to be replaced.
If the control panel is not the problem, move on to the next step.
The membrane switch is another part of your microwave that works with the control panel to operate the buttons. The membrane switch is a thin layer of plastic that has electrical contacts underneath. If the membrane switch is faulty or worn out, it can prevent your buttons from registering or responding.
To check the membrane switch, you need to use a multimeter or a continuity tester. You need to unplug the microwave and remove the cabinet and the control panel to access the membrane switch. Then, you need to test the membrane switch for continuity by touching its contacts with the probes of your tester while pressing and releasing the buttons.
If the membrane switch shows continuity when pressed and no continuity when released, it means it is working properly. If not, it means it is defective and needs to be replaced.
If the membrane switch is not the problem, move on to the next step.
The touchpad is another part of your microwave that works with the control panel and the membrane switch to operate the buttons. The touchpad is a sensitive surface that detects your finger pressure and sends signals to the control panel. If the touchpad is faulty or dirty, it can cause your buttons to malfunction or not work at all.
To check the touchpad, you need to use a multimeter or a continuity tester. You need to unplug the microwave and remove the cabinet and the control panel to access the touchpad. Then, you need to test the touchpad for continuity by touching its contacts with the probes of your tester while pressing and releasing the buttons.
If the touchpad shows continuity when pressed and no continuity when released, it means it is working properly. If not, it means it is defective and needs to be replaced.
If none of these steps solve your problem, you might need to contact a professional technician or Panasonic’s customer service for further assistance.
Here are some frequently asked questions and answers about Panasonic inverter microwave buttons not working that you might find helpful:
Q: How do I reset my Panasonic inverter microwave?
A: To reset your Panasonic inverter microwave, you need to unplug it from the power source for at least 10 seconds and then plug it back in. This will clear any errors or glitches that might cause your buttons to not work.
Q: How do I clean my Panasonic inverter microwave?
A: To clean your Panasonic inverter microwave, you need to wipe the inside and outside of your microwave with a damp cloth or sponge and some mild soap or vinegar. Avoid using abrasive cleaners or scouring pads that could scratch or damage the surface. You can also use a microwave-safe bowl filled with water and lemon juice and heat it for a few minutes to remove any odors or stains.
Q: How do I lock or unlock my Panasonic inverter microwave?
A: To lock or unlock your Panasonic inverter microwave, you need to press and hold the stop/cancel button for 3 seconds until you hear a beep. This will activate or deactivate the child safety lock feature that prevents unauthorized access or operation of your microwave.
Q: How do I set the clock on my Panasonic inverter microwave?
A: To set the clock on your Panasonic inverter microwave, you need to press the clock button and enter the current time using the number buttons. Then press the clock button again to confirm.
Q: How do I use the inverter technology on my Panasonic inverter microwave?
A: To use the inverter technology on your Panasonic inverter microwave, you need to select one of the inverter modes on your control panel. These modes include sensor cook, sensor reheat, turbo defrost, keep warm, popcorn, quick min, and more/less. These modes will automatically adjust the power level and cooking time according to the food type and size. This will ensure even and consistent heating and prevent overcooking or undercooking.
Panasonic inverter microwave buttons not working is a common problem that can have various causes and solutions. In this guide, we showed you how to fix it in 4 easy steps by checking and replacing some of the parts of your microwave.
We hope this guide was helpful and informative for you. If you have any questions or comments, feel free to leave them below. And if you liked this guide, don’t forget to share it with your friends and family who might also have a Panasonic inverter microwave buttons not working problem.
Hi there, I’m Dale from www.presstocook.com and I’m here to help you make the most of your kitchen appliances. You might be wondering why you should listen to me and what makes me qualified to give you advice on this topic. Well, let me tell you a bit about myself and my experience.
I have spent over a decade working in and running busy Asian restaurants in London. I had to get involved in all aspects of running the business, especially kitchen operations. I have worked with and purchased every type of kitchen appliance imaginable, from microwaves to rice cookers to woks. I have a thorough understanding of what works, the value kitchen equipment can bring, and how to operate appliances to the safest standards – All while ensuring the most delicious foods are being served up!
I am also certified in: HACCP (Hazard Analysis and Critical Control Points – Level 2), Food Safety (Level 3), Health and Safety, and Restaurant Management. All CPD certified and Endorsed by the institute of hospitality. So you can trust that I know what I’m talking about when it comes to food safety and quality.
But don’t worry, I’m not here to bore you with technical details or jargon. I’m here to share with you my passion and enthusiasm for cooking and kitchen appliances. I love to experiment with different recipes, cuisines, and gadgets. I love to discover new ways to make cooking easier, faster, and more fun. And I love to share my tips and tricks with you, so you can enjoy cooking as much as I do.
So, whether you are looking for a new microwave, a rice cooker, a wok, or any other kitchen appliance, you can count on me to give you honest and helpful reviews and guides. I will tell you everything you need to know about the features, benefits, drawbacks, and best practices of using these appliances. I will also show you how to use them to create amazing dishes that will impress your family and friends.
