You love your Panasonic microwave, don’t you? It’s a posho wosho appliance that can cook, reheat, and defrost your food in minutes. It’s a lifesaver when you are in a hurry or feeling lazy. It’s a loyal friend that never lets you down.
Until it does.
One day, you put your food in the microwave, press the start button, and wait for the magic to happen. But nothing happens. The food is still cold and uncooked. The microwave is not heating at all.
What do you do?
Don’t panic. There are some simple steps you can take to fix your Panasonic microwave and make it heat again. In this guide, we will show you how to troubleshoot and repair your microwave in 5 easy steps. We will also answer some frequently asked questions about Panasonic microwaves and their heating problems.
So, if you are ready to get your microwave back to work, keep reading!
The first thing you need to do is to check the power source of your microwave. Make sure it is plugged in properly and securely into a working outlet. Sometimes, the plug can get loose or the outlet can get tripped or damaged.
If the plug and the outlet are fine, check the fuse or the circuit breaker of your microwave. If they are blown or tripped, replace or reset them accordingly.
If the power source is not the problem, move on to the next step.
The next thing you need to check is the door switch of your microwave. The door switch is a safety device that prevents the microwave from operating when the door is open. If the door switch is faulty or misaligned, it can prevent the microwave from heating.
To check the door switch, you need to use a multimeter or a continuity tester. You need to unplug the microwave and remove the cabinet to access the door switch. Then, you need to test the switch for continuity while pressing and releasing it.
If the switch does not show continuity when pressed and shows continuity when released, it means it is working properly. If not, it means it is defective and needs to be replaced.
If the door switch is not the problem, move on to the next step.
The magnetron is the main component of your microwave that generates the microwaves that heat your food. If the magnetron is faulty or burned out, it can cause your microwave to stop heating.
To check the magnetron, you need to use a multimeter or a continuity tester. You need to unplug the microwave and remove the cabinet to access the magnetron. Then, you need to test the magnetron for resistance by touching its terminals with the probes of your tester.
If the magnetron shows low resistance (less than 1 ohm) or high resistance (more than 10 ohms), it means it is defective and needs to be replaced.
If the magnetron is not the problem, move on to the next step.
The diode is another component of your microwave that works with the magnetron to convert AC power into DC power for heating. If the diode is faulty or shorted, it can prevent your microwave from heating.
To check the diode, you need to use a multimeter or a continuity tester. You need to unplug the microwave and remove the cabinet to access the diode. Then, you need to test the diode for continuity by touching its terminals with the probes of your tester.
If the diode shows continuity in both directions, it means it is shorted and needs to be replaced. If the diode does not show continuity in either direction, it means it is open and needs to be replaced.
If the diode is not the problem, move on to the next step.
The capacitor is another component of your microwave that works with the magnetron and the diode to store and release electrical energy for heating. If the capacitor is faulty or leaking, it can cause your microwave to stop heating.
To check the capacitor, you need to use a multimeter or a capacitance meter. You need to unplug the microwave and remove the cabinet to access the capacitor. Then, you need to discharge the capacitor by touching its terminals with a screwdriver or a wire. Be careful as the capacitor can store a high voltage even when unplugged.
Then, you need to test the capacitor for capacitance by touching its terminals with the probes of your meter. If the capacitor shows a reading that is significantly lower or higher than its rated value, it means it is defective and needs to be replaced.
If none of these steps solve your problem, you might need to contact a professional technician or Panasonic’s customer service for further assistance.
Here are some frequently asked questions and answers about Panasonic microwave not heating that you might find helpful:
Q: How do I know if my Panasonic microwave is still under warranty?
A: To know if your Panasonic microwave is still under warranty, you need to check your receipt or invoice for the date of purchase and compare it with the warranty period of your model. You can also check the serial number of your microwave on Panasonic’s website or call their customer service.
Q: How much does it cost to repair a Panasonic microwave?
A: The cost of repairing a Panasonic microwave depends on several factors, such as the type and extent of damage, the availability of parts, and the labor charges of the technician. On average, it can range from $50 to $200.
Q: How long does a Panasonic microwave last?
A: The lifespan of a Panasonic microwave depends on how often and how well you use and maintain it. On average, a Panasonic microwave can last for 10 years or more.
Q: How can I prevent my Panasonic microwave from not heating?
A: There are some preventive measures you can take to avoid your Panasonic microwave from not heating, such as:
Q: Where can I find more information about Panasonic microwaves?
A: You can find more information about Panasonic microwaves on their official website, where you can browse their products, manuals, FAQs, and customer service. You can also visit Presstocook.com, where we share more tips and reviews on microwaves and other kitchen appliances.
Panasonic microwave not heating is a common problem that can have various causes and solutions. In this guide, we showed you how to fix it in 5 easy steps by checking and replacing some of the components of your microwave.
We hope this guide was helpful and informative for you. If you have any questions or comments, feel free to leave them below. And if you liked this guide, don’t forget to share it with your friends and family who might also have a Panasonic microwave not heating problem
