If you have a Whirlpool refrigerator, you may see a message on the display screen that says “cooling off”. This means that the cooling function of the refrigerator and freezer is turned off. This can happen for different reasons, such as a power outage, a button press, or a door seal issue. In this blog post, we will explain what cooling off means on a Whirlpool refrigerator and how to fix it.
Cooling off means that the cooling function of the refrigerator and freezer is turned off. To turn it back on, you need to press certain buttons on the control panel or check the door seal.
Why is cooling off on a Whirlpool refrigerator?
There are several possible causes for cooling off on a Whirlpool refrigerator. Some of them are:
- Power failure: If there is a power outage or surge, the refrigerator may automatically turn off the cooling function to protect itself from damage. When the power comes back on, you may need to manually turn on the cooling function again.
- Button press: If you accidentally press certain buttons on the control panel, you may activate or deactivate the cooling function. For example, some models have a Filter and Smart Grid button or a Measured Fill and Lock button that can turn on or off the cooling function when pressed together for about three seconds.
- Door seal issue: If the door seal of the refrigerator is worn or damaged, it may not be able to keep the cold air inside and prevent the warm air from entering. This may affect the temperature and performance of the refrigerator and cause it to turn off the cooling function.
How to fix cooling off on a Whirlpool refrigerator?
Depending on the cause of cooling off on your Whirlpool refrigerator, there are different ways to fix it. Here are some steps you can try:
- Check the power: Make sure that your refrigerator is plugged in and has power. If there was a power outage or surge, wait for a few minutes for the refrigerator to reset itself. If the power is still off, check your circuit breaker or fuse box and reset or replace them if needed.
- Press the buttons: Locate the buttons on your control panel that can turn on or off the cooling function. They may be labeled as Filter and Smart Grid or Measured Fill and Lock, depending on your model. Press and hold these buttons together for about three seconds or until you hear a beep sound. This should turn on the cooling function and clear the cooling off message from the display screen.
- Check the door seal: Inspect the door seal of your refrigerator and make sure that it is intact and clean. If it is torn or dirty, it may not be able to seal properly and cause cooling problems. You can test its condition by closing your fridge door and trying to pull it back open with a firm tug. If the door moves easily, then you likely have a worn seal that needs to be replaced.
Conclusion
Cooling off on a Whirlpool refrigerator means that the cooling function of the refrigerator and freezer is turned off. This can happen for different reasons, such as a power failure, a button press, or a door seal issue. To fix it, you need to press certain buttons on the control panel or check the door seal. By following these steps, you can restore your refrigerator’s normal function and enjoy your food and drinks.
We hope you found this blog post helpful and informative. If you have any questions or comments, feel free to leave them below. And don’t forget to share this post with your friends and family who have a Whirlpool refrigerator!
