Where Is The Water Filter On A Whirlpool Refrigerator Located

If you have a Whirlpool refrigerator with a water filter, you may wonder where it is located and how to access it. The water filter helps remove impurities and contaminants from your drinking water and ice, but it needs to be replaced every six months or when the filter light comes on. In this post, we will show you where to find the water filter on a Whirlpool refrigerator and how to replace it with a new one.

The water filter on a Whirlpool refrigerator is located either in the base grille at the bottom of the refrigerator or inside the refrigerator in the upper right back corner. Depending on the model, you may need to push a button, turn a knob, or pull a tab to release the filter from its housing. To replace the filter, you need to remove the old one, insert the new one, and reset the filter light.

How to Find the Water Filter on a Whirlpool Refrigerator

There are different types of Whirlpool refrigerators with different water filter locations. The location of your water filter will depend on your specific model. You can check your user manual for more details, or look for one of these common places where you can find the water filter on a Whirlpool refrigerator:

• In the base grille: Some Whirlpool refrigerators have the water filter in the base grille, which is located at the bottom of the refrigerator in front of the unit. The filter may have a round knob or a push button that you need to turn or press to release it from its housing. You may need to pull out the refrigerator and look at the back side of the grille to access it.
• Inside the refrigerator: Some Whirlpool refrigerators have the water filter inside the refrigerator, in the upper right back corner. The filter may have a pull tab or a quarter-turn cap that you need to pull or twist to release it from its housing. You may need to open both doors and remove any shelves or bins that block your access to it.

How to Replace the Water Filter on a Whirlpool Refrigerator

Once you find the water filter on your Whirlpool refrigerator, replacing it with a new one is easy. Here are some simple steps to follow:

• Remove the old filter: Locate the water filter on your Whirlpool refrigerator and release it from its housing. Depending on the model, you may need to push a button, turn a knob, pull a tab, or twist a cap to remove the filter. Pull the filter out and discard it.
• Insert the new filter: Open your new filter and remove any protective coverings from the O-rings. Make sure the O-rings are still in place after the cover has been removed. When inserting the new filter into the housing, make sure the arrow or notch is aligned with the slot or groove. Push or twist the filter until it locks into place. Do not force the water filter. If it does not slide in easily, rotate it until the notches are properly aligned with the grooves.
• Reset the filter light: After you replace the water filter, you need to reset the filter light so that it can start counting down again. The filter light is usually located on the display panel or inside control panel of your Whirlpool refrigerator. Depending on the model, you may need to press and hold a button for 3 seconds until the light turns off or changes color. The button may be labeled as “Filter reset”, “Reset”, “Water”, “Alarm”, etc. Check your user manual for more details.

FAQs

Q: Why do I need to replace the water filter on my Whirlpool refrigerator?

A: The water filter on your Whirlpool refrigerator helps remove impurities and contaminants from your drinking water and ice, such as chlorine, lead, mercury, cysts, etc. Replacing the water filter every six months or when the filter light comes on will ensure that you get clean and fresh water and ice from your refrigerator.

Q: What kind of water filter do I need for my Whirlpool refrigerator?

A: The kind of water filter you need for your Whirlpool refrigerator will depend on your specific model. You can check your user manual or look for the model number on the old filter to find out what kind of water filter you need. You can also use this tool to find the approved water filter for your Whirlpool refrigerator. Make sure you use a genuine Whirlpool water filter that is compatible with your refrigerator model. Do not use third-party water filters, which may leak and damage your refrigerator.

Q: How do I know if the water filter on my Whirlpool refrigerator is working properly?

A: You can check the filter light on your Whirlpool refrigerator to see if the water filter is working properly. The filter light is usually located on the display panel or inside control panel of your Whirlpool refrigerator. Depending on the model, the filter light may change color or flash to indicate the status of the filter. Here are some common meanings of the filter light:

• Blue or green: The filter is working properly and does not need to be replaced.
• Yellow or orange: The filter is near the end of its life and needs to be replaced soon.
• Red or flashing: The filter has reached the end of its life and needs to be replaced immediately.

Conclusion

The water filter on a Whirlpool refrigerator is located either in the base grille at the bottom of the refrigerator or inside the refrigerator in the upper right back corner. Depending on the model, you may need to push a button, turn a knob, or pull a tab to release the filter from its housing. To replace the filter, you need to remove the old one, insert the new one, and reset the filter light. This will help you get clean and fresh water and ice from your refrigerator.