Whirlpool Bottom Freezer: Does It Open Sideways And How To Adjust It

If you have a Whirlpool bottom freezer refrigerator, you may be wondering if it opens sideways and how to adjust it. A bottom freezer refrigerator has the freezer compartment at the bottom and the fresh food compartment at the top. This design allows you to access your frequently used items at eye level and store your frozen items below.

A Whirlpool bottom freezer refrigerator can open sideways, depending on the model and the door configuration.

Some models have a single door for the freezer that swings open to the left or right, while others have a drawer that slides out horizontally. In this post, we will show you how to adjust the doors or drawer of your Whirlpool bottom freezer refrigerator and make sure they are level and aligned.

How to adjust the doors of your Whirlpool bottom freezer refrigerator?

If you have a Whirlpool bottom freezer refrigerator with a single door for the freezer, you may need to adjust the door if it is not level or aligned with the refrigerator door. A misaligned or uneven door can affect the seal and performance of your refrigerator, as well as its appearance. Here are the steps to adjust the doors of your Whirlpool bottom freezer refrigerator:

1. Unplug your refrigerator from the power source and remove any food items from the doors.
2. Remove the front base grille by grasping it firmly with two hands and pulling it out from the bottom.
3. Locate the leveling screws or rollers at the front corners of the refrigerator. You may need a flat-head screwdriver or a nut driver to adjust them.
4. To raise or lower the front of the refrigerator, turn the leveling screws or rollers clockwise or counterclockwise. This will also tilt the refrigerator slightly backward or forward, which helps with door closure and stability.
5. To align the doors, use a level or a ruler to measure the gap between them. If there is a difference in height, adjust the door hinge screws on top of the doors with a hex wrench until they are even.
6. Replace the front base grille by aligning it with the clips and pushing it in until it snaps into place.
7. Plug in your refrigerator and check if the doors are level and aligned.

How to adjust the drawer of your Whirlpool bottom freezer refrigerator?

If you have a Whirlpool bottom freezer refrigerator with a drawer for the freezer, you may need to adjust the drawer if it is not sliding smoothly or closing properly. A misaligned or uneven drawer can cause frost buildup, water leakage, or food spoilage in your freezer. Here are the steps to adjust the drawer of your Whirlpool bottom freezer refrigerator:

1. Unplug your refrigerator from the power source and remove any food items from the drawer.
2. Open the freezer drawer fully and locate the drawer slides on both sides of the drawer.
3. To raise or lower one side of the drawer, loosen or tighten the adjustment screw on that side with a Phillips screwdriver. The adjustment screw is located at the front end of the slide, near where it attaches to the drawer.
4. To align both sides of the drawer, use a level or a ruler to measure the gap between them. If there is a difference in height, adjust both adjustment screws until they are even.
5. Close and open the drawer several times to check if it is sliding smoothly and closing properly.
6. Plug in your refrigerator and restock your freezer drawer.

FAQs about Whirlpool bottom freezer refrigerator

Q: How do I reverse the door swing of my Whirlpool bottom freezer refrigerator?

A: Some models of Whirlpool bottom freezer refrigerators allow you to reverse the door swing from left to right or vice versa, depending on your preference and space availability. To reverse the door swing, you will need some basic tools and skills, as well as an extra person to help you lift and hold the doors. You can follow this video guide for detailed instructions on how to reverse the door swing of your Whirlpool bottom freezer refrigerator.

Q: How do I remove and replace the drawer of my Whirlpool bottom freezer refrigerator?

A: You may need to remove and replace the drawer of your Whirlpool bottom freezer refrigerator for cleaning or maintenance purposes. To remove and replace the drawer, follow these steps:

1. Unplug your refrigerator from the power source and remove any food items from the drawer.
2. Open the freezer drawer fully and lift up on both sides of it until it clears from its slides.
3. Carefully pull out the drawer from its rails and set it aside on a flat surface.
4. To replace the drawer, align it with its rails and push it in until it snaps into place.
5. Close and open the drawer several times to check if it is sliding smoothly and closing properly.
6. Plug in your refrigerator and restock your freezer drawer.

Q: How do I clean and maintain my Whirlpool bottom freezer refrigerator?

A: To keep your Whirlpool bottom freezer refrigerator in good condition, you should clean and maintain it regularly. Here are some tips on how to clean and maintain your Whirlpool bottom freezer refrigerator:

• Wipe down the interior and exterior surfaces of your refrigerator with a soft cloth and a mild detergent. Avoid using abrasive cleaners or scouring pads that may scratch or damage the finish.
• Clean the door seals with a damp cloth and check for any cracks or tears. Replace them if they are damaged or worn out.
• Vacuum or brush the condenser coils at the back or bottom of your refrigerator every six months or as needed. This will help improve the efficiency and performance of your refrigerator.
• Change your water filter every six months or as recommended by your manufacturer. This will ensure that you have clean and fresh water and ice from your dispenser and ice maker.
• Defrost your freezer manually if it is not frost-free, or at least once a year if it is frost-free. This will prevent ice buildup and improve the airflow and temperature regulation in your freezer.