If you have a Whirlpool bottom freezer refrigerator, you probably enjoy having fresh and clean water and ice at your fingertips. But did you know that you need to change the water filter regularly to keep it that way? In this post, we’ll show you how to change the water filter in a Whirlpool bottom freezer refrigerator and why it matters.
To change the water filter in a Whirlpool bottom freezer refrigerator, you need to locate the filter cover in the base grille, pull out the old filter, and insert the new one. Then, flush the system and reset the filter light. You should change the filter every six months or when the indicator light comes on.
The first step is to locate the filter cover in the base grille of your refrigerator. The base grille is the vented panel at the bottom of your fridge. The filter cover is a small door that can be opened by pulling it out.
Before you open the filter cover, make sure you unplug the refrigerator and turn off the power at the electrical outlet. This will prevent any electric shock or damage to your appliance.
The next step is to pull out the old filter and insert the new one. The filter is a cylindrical device that has a knob or a button on one end. To remove it, you need to turn it counterclockwise and pull it out of the filter housing.
To insert the new filter, you need to remove the protective coverings from the O-rings and make sure they are still in place. Then, align the arrow on the filter with the arrow on the filter housing and push it in. Turn it clockwise until it locks into place.
The last step is to flush the system and reset the filter light. Flushing the system means running water through the new filter to remove any air or debris that may be trapped inside. To do this, you need to run four gallons of water through the dispenser or fill a large container four times.
Resetting the filter light means turning off the indicator light that tells you when to change your filter. To do this, you need to press and hold the Filter Reset button on your refrigerator control panel for three seconds. The light should turn off or change color.
Changing your water filter matters because it ensures that your water and ice are clean and safe to drink. The water filter removes contaminants such as chlorine, lead, mercury, cysts, pesticides, and more from your tap water. These contaminants can affect your health and taste of your water.
If you don’t change your water filter regularly, it can become clogged or saturated with impurities. This can reduce its effectiveness and cause problems such as low water pressure, bad odor, cloudy ice, or bacterial growth. It can also damage your refrigerator or cause leaks.
Q: How often should I change my water filter in a Whirlpool bottom freezer refrigerator?
A: You should change your water filter every six months or when the indicator light comes on. This will depend on your water usage and quality. If you notice any changes in your water taste, odor, or appearance, you may need to change it sooner.
Q: How do I know which water filter I need for my Whirlpool bottom freezer refrigerator?
A: You can find out which water filter you need by looking at the number printed on your old filter or by checking your owner’s manual. You can also visit www.whirlpool.com/waterfilters to find out which filter is compatible with your model.
Q: Where can I buy a replacement water filter for my Whirlpool bottom freezer refrigerator?
A: You can buy a replacement water filter from www.whirlpool.com/waterfilters or from other authorized retailers online or in-store. Make sure you buy an original or approved water filter for your refrigerator to ensure quality and performance.
We hope this guide helped you learn how to change the water filter in a Whirlpool bottom freezer refrigerator and why it matters. Now you can enjoy fresh and clean water and ice with confidence. For more tips and tricks on kitchen appliances and food safety, check out our blog at PressToCook.com.
