If you have a Whirlpool refrigerator with a bottom freezer drawer, you may want to remove the divider for various reasons. Maybe you need more space to store large items, or maybe you want to clean the drawer thoroughly. Whatever the case, removing the divider is not a difficult task, and you can do it yourself in a few minutes. In this post, we will show you how to remove the divider from a Whirlpool freezer and how to put it back.
To remove the divider from a Whirlpool freezer, you need to remove the freezer door, eject the locking tab, remove the top drawer, lift the bottom freezer drawer, and replace the drawer. To put it back, you need to reverse the steps.
How To Remove The Divider From A Whirlpool Freezer
Before you start, make sure you unplug the refrigerator from the power source and empty the freezer drawer of any food items. Then follow these steps:
Step 1: Remove The Freezer Door
- Locate the screws on the top and bottom of the freezer door hinges and use a Phillips screwdriver to loosen them.
- Lift the door slightly and pull it out of the hinges.
- Set the door aside on a soft surface to avoid scratching it.
Step 2: Eject The Locking Tab
- Look for a small plastic tab on the left side of the freezer drawer rail.
- Use a flathead screwdriver or a butter knife to pry it out of its slot.
- This will release the rail from the drawer.
Step 3: Remove The Top Drawer
- Pull the top drawer out as far as it can go.
- Lift it up and out of the rails.
- Set it aside on a flat surface.
Step 4: Lift The Bottom Freezer Drawer
- Pull the bottom freezer drawer out as far as it can go.
- Locate the clips on the back of the divider that hook onto the back wall of the drawer.
- Remove the front of the divider to unhook it from the back wall of the drawer.
- Lift the divider out of the drawer.
Step 5: Replace The Drawer
- Slide the bottom freezer drawer back into the rails until it clicks into place.
- Slide the top drawer back into the rails until it clicks into place.
- Align the freezer door with the hinges and insert the screws.
- Tighten them with a Phillips screwdriver.
- Plug in the refrigerator and check if everything works properly.
How To Put The Divider Back Into A Whirlpool Freezer
If you want to put the divider back into your Whirlpool freezer, you need to follow these steps in reverse order:
Step 1: Remove The Freezer Door
- Unplug the refrigerator from the power source and empty the freezer drawer of any food items.
- Locate the screws on the top and bottom of the freezer door hinges and use a Phillips screwdriver to loosen them.
- Lift the door slightly and pull it out of the hinges.
- Set it aside on a soft surface to avoid scratching it.
Step 2: Remove The Top And Bottom Drawers
- Pull out both drawers as far as they can go.
- Lift them up and out of their rails.
- Set them aside on a flat surface.
Step 3: Insert The Divider Into The Bottom Freezer Drawer
- Locate the clips on the back of the divider that hook onto the back wall of the drawer.
- Align them with their slots on the back wall of the drawer and push them in until they snap into place.
- Make sure that there is enough clearance for both drawers to slide in and out smoothly.
Step 4: Replace The Drawers And The Door
- Slide both drawers back into their rails until they click into place.
- Align the freezer door with its hinges and insert its screws.
- Tighten them with a Phillips screwdriver.
- Plug in your refrigerator and check if everything works properly.
FAQs
Q: Why would I want to remove or replace my freezer divider?
A: You may want to remove or replace your freezer divider for various reasons, such as:
- You need more space to store large or bulky items in your freezer
- You want to clean your freezer drawer thoroughly
- You want to replace a damaged or broken divider
- You want to customize your freezer organization according to your preferences
Q: How do I adjust my freezer divider?
A: Some Whirlpool freezers have adjustable dividers that allow you to change their position according to your needs. To adjust your freezer divider, follow these steps:
- Pull out your freezer drawer as far as it can go
- Locate the plastic clip at the rear of your basket that extends beyond its rim
- Pry it apart slightly and lift it up to remove the divider
- Slide the divider to your desired position and snap it back into place
Q: What are some tips for maintaining my freezer divider?
A: To keep your freezer divider in good condition, follow these tips:
- Clean your freezer divider regularly with a damp cloth and mild soap
- Avoid using harsh or abrasive cleaners or tools that may scratch or damage your divider
- Check your divider for any cracks or signs of wear and tear and replace it if necessary
- Store your food items in appropriate containers or bags to prevent spills or leaks that may stain or damage your divider
Conclusion
Removing and replacing the divider from your Whirlpool freezer is not a hard task, and you can do it yourself in a few minutes. All you need are some basic tools and some patience. By following the steps we have outlined in this post, you can easily remove or replace your freezer divider and enjoy more space and flexibility in your freezer. We hope you found this post helpful and informative. If you have any questions or comments, feel free to leave them below. And don’t forget to check out our other posts on kitchen appliances and food safety at PressToCook.com!
