If you have a Whirlpool refrigerator with a bottom freezer drawer, you may need to pull it out for cleaning, maintenance, or repair purposes. The freezer drawer is designed to slide in and out smoothly on rails, but it can be tricky to remove it completely from the refrigerator. In this post, we’ll show you how to pull out the freezer drawer from a Whirlpool refrigerator and how to put it back.
To pull out the freezer drawer from a Whirlpool refrigerator, you’ll need to remove the freezer basket, lift the drawer off the rails, and disconnect the wire harness. To put it back, you’ll need to reconnect the wire harness, slide the drawer onto the rails, and replace the freezer basket.
How to pull out the freezer drawer from a Whirlpool refrigerator
To pull out the freezer drawer from a Whirlpool refrigerator, you’ll need the following tools:
- A Phillips screwdriver
- A flathead screwdriver
Here are the steps to follow:
- Unplug your refrigerator from the power source and empty any items from the freezer drawer.
- Open the freezer drawer until it stops. Inside the freezer drawer, you’ll see a freezer basket that rests on a frame. Lift the basket up and out of the drawer by lifting the front first and then sliding it forward. Set it aside.
- Locate the screws that hold the frame to the rails on each side of the drawer. Use a Phillips screwdriver to remove them and set them aside. Be careful not to lose them, as you’ll need them later.
- Lift the frame off the rails by lifting the front first and then sliding it forward. Set it aside.
- Locate the wire harness that connects the drawer to the refrigerator at the back of the drawer. Use a flathead screwdriver to pry open the locking tab and disconnect the wire harness. Be careful not to damage it, as you’ll need it later.
- Lift the drawer off the rails by lifting both sides at the same time and pulling it forward. You may need someone to help you with this step, as the drawer can be heavy and bulky.
- Set the drawer on a flat surface or on a moving blanket or tarp to protect it from scratches.
How to put back the freezer drawer into a Whirlpool refrigerator
To put back the freezer drawer into a Whirlpool refrigerator, you’ll need to reverse the steps above. Here are the steps to follow:
- Plug in your refrigerator to the power source.
- Lift the drawer onto the rails by lifting both sides at the same time and pushing it backward. Make sure it’s aligned with the rails and slides smoothly.
- Reconnect the wire harness that connects the drawer to the refrigerator at the back of the drawer. Make sure it’s locked securely in place.
- Replace the frame onto the rails by sliding it backward and lowering it down. Make sure it’s aligned with the rails and slides smoothly.
- Replace the screws that hold the frame to the rails on each side of the drawer. Use a Phillips screwdriver to tighten them. Don’t over-tighten them, as this can damage them or strip them.
- Replace the basket into the drawer by sliding it backward and lowering it down. Make sure it’s aligned with the frame and rests securely on it.
- Close the freezer drawer and check if it’s working properly.
FAQs about Whirlpool freezer drawers
Here are some of the most common questions that people have about Whirlpool freezer drawers:
- Why do I need to pull out my freezer drawer? You may need to pull out your freezer drawer for various reasons, such as:
- Cleaning or defrosting your freezer
- Replacing or repairing a part of your freezer
- Moving or installing your refrigerator
- Accessing something behind or under your freezer
- How do I clean my freezer drawer? To clean your freezer drawer, you’ll need to unplug your refrigerator, empty any items from your freezer, and remove your freezer basket and frame as described above. Then, you can wipe down your freezer drawer with a soft cloth and warm water mixed with mild soap or baking soda. Rinse with clean water and dry with a towel. You can also use a vacuum cleaner or a brush to remove any dust or debris from your rails or wire harness.
- How do I prevent frost build-up in my freezer? To prevent frost build-up in your freezer, you should make sure your freezer door is sealing properly and avoid opening and closing it too frequently. You should also keep your freezer at an optimal temperature setting, which is usually between 0°F and 5°F for most models. You should also defrost your freezer regularly if it’s not a frost-free model. To defrost your freezer, you’ll need to unplug it, empty it of any food or items, and let the ice melt. You can use a scraper or a hair dryer to speed up the process. Once the ice is gone, wipe down the interior with a cloth and water, and dry with a towel. Plug in your freezer and let it cool down before putting your food back in.
Conclusion
A Whirlpool freezer drawer is a convenient feature that allows you to store and access your frozen foods easily and efficiently. However, sometimes you may need to pull it out for cleaning, maintenance, or repair purposes. To do this, you’ll need to remove the freezer basket and frame, lift the drawer off the rails, and disconnect the wire harness. To put it back, you’ll need to reconnect the wire harness, slide the drawer onto the rails, and replace the freezer basket and frame. By following these tips and tricks, you can pull out and put back your Whirlpool freezer drawer without any hassle.
