If you have a Whirlpool upright freezer that is not working properly, you might need to reset it. Resetting your freezer can help fix some common issues, such as not keeping the temperature, not defrosting, or displaying an error code. In this post, we will show you how to reset a Whirlpool upright freezer and when to do it.
To reset a Whirlpool upright freezer, you need to unplug the power cord from the wall, wait for at least 30 seconds, then plug it back in. This should reset the freezer and restore it to its normal operating mode.
Why You Might Need To Reset Your Freezer
Sometimes, your freezer might experience some glitches or malfunctions that affect its performance or functionality. For example, your freezer might:
- Not keep the temperature or fluctuate between too cold and too warm
- Not defrost or frost up excessively
- Display an error code or beep continuously
- Not respond to the control panel or the door alarm
- Not run at all or run constantly
These issues can be caused by various factors, such as power surges, faulty components, incorrect settings, or human errors. In many cases, resetting your freezer can help clear these problems and make your freezer work normally again.
How To Reset Your Whirlpool Upright Freezer
Resetting your Whirlpool upright freezer is easy and quick. You just need to follow these steps:
- Unplug the power cord from the wall outlet. You might hear a loud whooshing, gurgling, or hissing noise as the pressure equalizes in the freezer.
- Wait for at least 30 seconds. This will allow the freezer to reset its internal components and clear any error codes or glitches.
- Plug the power cord back into the wall outlet. Make sure it is securely connected and not loose or damaged.
- Check the control panel and the temperature display. They should light up and show the correct settings. If not, you might need to adjust them manually.
- Check the freezer’s operation and performance. It should run smoothly and maintain the desired temperature. If not, you might need to troubleshoot further or contact a professional for assistance.
FAQs
- How do I know if my Whirlpool upright freezer needs to be reset?
If your Whirlpool upright freezer is not working properly or displaying an error code, you might need to reset it. Some common error codes are:
- CE: Communication error between the main control board and the user interface board
- CF: Communication error between the main control board and the fan motor
- d: Defrost cycle indicator
- E: Evaporator sensor error
- F: Freezer sensor error
- OF: Power outage indicator
- PE: Programming mode indicator
- How often should I defrost my Whirlpool upright freezer?
Most Whirlpool upright freezers have a self-defrosting feature that automatically melts any frost buildup on the evaporator coils every 8 to 12 hours. However, if your freezer does not have this feature or if it is not working properly, you might need to defrost it manually every few months or when the frost layer is more than 1/4 inch thick.
To defrost your Whirlpool upright freezer manually, you need to:
- Unplug the power cord from the wall outlet and empty the freezer of any food items.
- Place towels or pans on the floor to catch any water drips.
- Leave the freezer door open and let the frost melt naturally. Do not use any sharp tools or heat sources to speed up the process, as they can damage the freezer.
- Wipe off any water or frost with a cloth and dry the interior of the freezer thoroughly.
- Plug the power cord back into the wall outlet and reload the freezer with food items.
- How do I adjust the temperature on my Whirlpool upright freezer?
To adjust the temperature on your Whirlpool upright freezer, you need to:
- Locate the temperature control knob or buttons on the control panel inside or outside of the freezer door.
- Turn the knob or press the buttons to set the desired temperature level. The higher the number, the colder the temperature.
- Wait for at least 24 hours for the temperature to stabilize before checking it with a thermometer.
Conclusion
Resetting your Whirlpool upright freezer can help fix some common issues that affect its performance or functionality. To reset your freezer, you just need to unplug it from the wall outlet, wait for at least 30 seconds, then plug it back in. This should restore your freezer to its normal operating mode. If resetting your freezer does not solve the problem, you might need to troubleshoot further or contact a professional for assistance.
