A Frigidaire chest freezer is a great appliance that can store large amounts of frozen food and help you save space and money. However, like any appliance, it can sometimes have problems that affect its performance and efficiency. If your Frigidaire chest freezer is not cooling properly, making strange noises, leaking water, or showing other signs of malfunctioning, you might want to inspect it for problems and troubleshoot it before calling a professional repair service. In this post, we’ll show you how to inspect a Frigidaire chest freezer for problems and what to do if you find any.
To inspect a Frigidaire chest freezer for problems, you should check the power supply, the thermostat, the evaporator fan motor, the start relay, the condenser coils, the evaporator coils, the temperature control thermostat, the condenser fan motor, and the lid gasket. You can use a multimeter to test some of these parts for continuity or resistance. You can also use a cloth, soap, water, and a vacuum cleaner to clean some of these parts from dirt or dust.
How To Inspect A Frigidaire Chest Freezer For Problems
Before you start inspecting your Frigidaire chest freezer for problems, you should unplug it from the power source and empty it of food. You should also wear gloves and safety glasses to protect yourself from any sharp or electrical parts. Here are some steps to follow to inspect your Frigidaire chest freezer for problems:
- Check the power supply: The first thing to check is whether your Frigidaire chest freezer is getting power or not. You can do this by plugging another appliance into the same outlet and seeing if it works. If it doesn’t work, then the problem is with the outlet or the circuit breaker. You can try resetting the circuit breaker or replacing the fuse with a 15 amp time-delay fuse. If it does work, then the problem is with your freezer or its power cord. You can check the power cord for any damage or loose connections and replace it if needed.
- Check the thermostat: The thermostat is the part that regulates the temperature inside your Frigidaire chest freezer. If it is faulty or set too high, your freezer may not cool properly or at all. You can check the thermostat by turning it to the lowest setting and listening for a click sound. If you hear a click sound, then the thermostat is working. If you don’t hear a click sound, then the thermostat may be defective and need to be replaced. You can also test the thermostat with a multimeter by removing the access panel on the side of the freezer and disconnecting the tube that runs from the thermostat to the freezer. Then, set your multimeter to Rx1 and touch the probes to each terminal of the thermostat. If your multimeter reads continuity, then your thermostat is working. If your multimeter does not read continuity, then your thermostat is not working and need to be replaced.
- Check the evaporator fan motor: The evaporator fan motor is the part that circulates cold air inside your Frigidaire chest freezer. If it is faulty or blocked by ice or debris, your freezer may not cool properly or at all. You can check the evaporator fan motor by opening the door of the freezer and pressing the door switch. If you hear a humming or whirring sound, then the fan motor is working. If you don’t hear any sound or hear a grinding or squealing sound, then the fan motor may be defective or obstructed and need to be repaired or replaced. You can also test the fan motor with a multimeter by removing the access panel on the back or the bottom of the freezer and disconnecting the wires from the fan motor. Then, set your multimeter to Rx1 and touch the probes to each terminal of the fan motor. If your multimeter reads between 50 and 200 ohms, then your fan motor is working. If your multimeter reads zero or infinity, then your fan motor is not working and need to be replaced.