How To Remove The Freezer Drawer From A Whirlpool Refrigerator

If you have a Whirlpool refrigerator with a bottom freezer drawer, you may need to remove the drawer for cleaning, maintenance or repair purposes. The freezer drawer is designed to slide out easily on rails, but it also has tabs that lock it in place and prevent it from falling off. To remove the freezer drawer, you need to release the tabs and pull out the drawer carefully. To remove the freezer drawer from a Whirlpool refrigerator, you need to open the freezer door, lift up the front of the drawer, press the tabs on both sides of the drawer, and slide out the drawer.

Open the Freezer Door

The first step to remove the freezer drawer from a Whirlpool refrigerator is to open the freezer door fully. This will give you access to the freezer drawer and its rails. Make sure that there is enough space in front of your refrigerator to pull out the drawer completely.

Lift Up the Front of the Drawer

The next step to remove the freezer drawer from a Whirlpool refrigerator is to lift up the front of the drawer slightly. This will disengage the drawer from its rails and allow you to slide it out. You can use both hands to lift up the front of the drawer or use one hand and a screwdriver or a spatula to pry it up.

Press the Tabs on Both Sides of the Drawer

The next step to remove the freezer drawer from a Whirlpool refrigerator is to press the tabs on both sides of the drawer. The tabs are located near the back of the drawer and are usually white or gray plastic pieces that stick out from the sides of the drawer. You can use your fingers or a screwdriver to press them inward. This will release the drawer from its locks and allow you to slide it out.

Slide Out the Drawer

The final step to remove the freezer drawer from a Whirlpool refrigerator is to slide out the drawer carefully. You can use both hands to pull out the drawer or use one hand and a screwdriver or a spatula to guide it out. Be careful not to drop or damage the drawer or its contents. You can place the drawer on a flat surface or on a towel or a blanket.

FAQs

• How do I put back the freezer drawer in a Whirlpool refrigerator?

To put back the freezer drawer in a Whirlpool refrigerator, you need to reverse the steps that you took to remove it. You need to:

• Slide in the drawer until it reaches its rails.
• Push down the front of the drawer until it snaps into place.
• Close the freezer door.
• What are some reasons to remove the freezer drawer from a Whirlpool refrigerator?

Some reasons to remove the freezer drawer from a Whirlpool refrigerator are:

• To clean or sanitize the drawer and its rails.
• To defrost or unclog the drain hole in the back of the freezer.
• To replace or repair any damaged parts of the drawer or its rails.
• To access any items that may have fallen behind or under the drawer.
• What are some tips to remove the freezer drawer from a Whirlpool refrigerator safely and easily?

Some tips to remove the freezer drawer from a Whirlpool refrigerator safely and easily are:

• Empty or transfer any food items from your freezer drawer before removing it.
• Wear gloves and protective eyewear when working with your freezer drawer and its parts.
• Use gentle force and avoid bending or breaking any parts of your freezer drawer or its rails.
• Keep children and pets away from your work area when removing your freezer drawer.

Conclusion

Your Whirlpool refrigerator’s freezer drawer is an important part of your appliance that allows you to store and access your frozen food items conveniently. To remove your freezer drawer, you need to open your freezer door, lift up your front of your drawer, press your tabs on both sides of your drawer, and slide out your drawer. By following these simple steps, you can remove your freezer drawer from your Whirlpool refrigerator safely and easily.